+44(0) 1234 567 890 info@domainname.com

Sabtu, 05 Oktober 2013

Unique Car : Batmobile

If you've ever wanted to be Bruce Wayne and play Batman, the first thing you need aside from a cape and mask is a Batmobile. But Batmobiles just don't grow on trees. And the real deal very rarely shows up for sale in your local auto trader. But last night that all changed. For the last few weeks it's been reported all over the net that George Barris was going to bring Batmobile #1. The original car built for the Batman TV series to the Barrett Jackson Scottsdale auction. And he sure didn't fail to bring the circus with him.

Built from the 1955 Lincoln Futura concept car, which Barris purchased for $1 from Ford Motor Co. , was transformed in a matter of weeks to the cost of $15,000 to play the part in the upcoming Batman TV series in 1966. As Barris put it, the car would go POW! with rocket launchers, BAM! with a chain slicer, ZAP! with an oil slick. All gadgets that would make even James Bond envious. The car eventually led to a handful of fiberglass back up cars being built as the Futura based car had a habit of breaking down on the set. After the show, Barris retained ownership of the car. But enough about that.


The folks at Barrett Jackson said this was a deal three years in the making. And they didn't fail to hype up the car once it was consigned. The Batmobile was definitely the star of the show. There were crowd surrounding the car while it was on display and flock of groupies followed the car and King George as it made its way to the auction block. The crowd on the block was just as impressive at over 20 deep. Craig Jackson and Steve Davis actually had to cut Barris off or he would have talked about the Batmobile for hours. When the bidding started it quickly rose to $1 million, then $2 million before stalling at $2.6 million. The reserve was lifted and bidding again took off. $3 million, $4 million. Two bidders, sitting one in front of the other still were going at it, when they decided to flip a coin for who would win. The winner, Rick Champagne was the winning bidder at $4.2 million dollars. Speed's cameras captured the whole soap opera, and quickly interviewed Champagne who told viewers he's been a buyer at Barrett Jackson for 15 years and he came with all intentions of buying the Batmobile for his collection. He joked that he plans to tear down a wall and park it in his living room.
1 comment

Corvette Stingray 2014 Detail and Spesification

Here's all the details you wanted to know about the new 2014 Corvette Stingray. This will be the first of several posts we'll have dedicated to the C7. Right now, the base Stingray will have an estimated 450 horse power with 450 lb. ft of torque. No word yet on a new Z06 or ZR1. However, expect those numbers to be significantly higher.

Most impressive on the new C7 will be the extensive use of carbon fiber for body panels and interior pieces. Even more impressive is the use of magnesium for other pieces like the seat frames.  Rather than the conventional 6 speed we have seen in the Corvette for the last three generations. The C7 will come with an all new 7 speed manual. This new transmission is automatically controlled to match engine speeds and anticipates gear changes. This is supposed to make even a novice manual driver seem like a pro. An optional 6 speed automatic with paddle shifters will also be available.

Matted to this new transmission will be a 6.2 liter LT1 V8. Fuel mileage hasn't been released yet, but Chevrolet promises to exceed the 26 mpg the current C6 is rated at.

Source: GM

Press Release:


Return of the Stingray: The 2014 Chevrolet Corvette
DETROIT – Chevrolet is redefining modern performance with today’s debut of the all-new Corvette Stingray. And only a Corvette with the perfect balance of technology, design and performance can wear the iconic Stingray designation.
The 2014 Corvette Stingray is the most powerful standard model ever, with an estimated 450 horsepower (335 kW) and 450 lb.-ft. of torque (610 Nm). It is also the most capable standard model ever, able to accelerate from 0-60 in less than four seconds and achieve more than 1g in cornering grip. It is expected to be the most fuel-efficient Corvette, exceeding the EPA-estimated 26 mpg of the current model.
“Like the ’63 Sting Ray, the best Corvettes embodied performance leadership, delivering cutting-edge technologies, breathtaking design and awe-inspiring driving experiences,” said General Motors North America President Mark Reuss. “The all-new Corvette goes farther than ever, thanks to today’s advancements in design, technology and engineering.”
The all-new Corvette Stingray shares only two parts with the previous generation Corvette. It incorporates an all-new frame structure and chassis, a new powertrain and supporting technologies, as well as completely new exterior and interior designs. Highlights include:
·         An interior that includes real carbon fiber, aluminum and hand-wrapped leather materials, two new seat choices – each featuring a lightweight magnesium frame for exceptional support – and dual eight-inch configurable driver/infotainment screens
·         Advanced driver technologies, including a five-position Drive Mode Selector that tailors 12 vehicle attributes to the fit the driver’s environment and a new seven-speed manual transmission with Active Rev Matching that anticipates gear selections and matches engine speed for perfect shifts every time
·         An all-new 6.2L LT1 V-8 engine combines advanced technologies, including direct injection, Active Fuel Management, continuously variable valve timing and an advanced combustion system that delivers more power while using less fuel
·         Lightweight materials, including a carbon fiber hood and removable roof panel; composite fenders, doors and rear quarter panels; carbon-nano composite underbody panels and a new aluminum frame help shift weight rearward for an optimal 50/50 weight balance that supports a world-class power-to-weight ratio
·         A sculptured exterior features advanced high-intensity discharge and light-emitting diode lighting and racing-proven aerodynamics that balance low drag for efficiency and performance elements for improved stability and track capability
·         Track-capable Z51 Performance Package including: an electronic limited-slip differential, dry-sump oiling system, integral brake, differential and transmission cooling, as well as a unique aero package that further improves high-speed stability.
“Stingray is one of the hallowed names in automotive history,” said Ed Welburn, GM vice president of global design. “We knew we couldn’t use the Stingray name unless the new car truly lived up to the legacy. The result is a new Corvette Stingray that breaks from tradition, while remaining instantly recognizable as a Corvette the world over.”
The new Corvette Stingray will be built at GM’s Bowling Green, Ky., assembly plant, which underwent a $131-million upgrade, including approximately $52 million for a new body shop to manufacture the aluminum frame in-house for the first time.  
“We believe the Corvette represents the future of modern performance cars because it delivers more power, more driving excitement and better fuel efficiency,” said Tadge Juechter, Corvette chief engineer. “The result is better performance by every measure. The 2014 Corvette delivers the fastest acceleration, the most cornering grip, the most track capability, the best braking performance and what we expect to be the best fuel economy ever for a standard Corvette.”
The 2014 Corvette Stingray coupe goes on sale in the third quarter of 2013.
Founded in 1911 in Detroit, Chevrolet is now one of the world's largest car brands, doing business in more than 140 countries and selling more than 4 million cars and trucks a year. Chevrolet provides customers with fuel-efficient vehicles that feature spirited performance, expressive design and high quality. More information on Chevrolet models can be found at www.chevrolet.com.
More spesification
Here's the preliminary specs on the new C7 Corvette. 

Source: General Motors

2014 Chevrolet Corvette Stingray Preliminary Specifications
Overview
Model:
2014 Chevrolet Corvette Stingray
Body styles / driveline:
2-door hatchback coupe with removable roof panel; rear-wheel drive
Construction:
composite and carbon-fiber body panels, hydroformed aluminum frame with aluminum and magnesium structural and chassis components
Manufacturing location:
Bowling Green, Ky.
Engine
LT1 6.2L V-8
Displacement (cu in / cc):
376 / 6162
Bore & stroke (in / mm):
4.06 x 3.62 / 103.25 x 92
Block material:
cast aluminum
Cylinder head material:
cast aluminum
Valvetrain:
overhead valve, two valves per cylinder
Fuel delivery:
direct injection
Compression ratio:
11.5:1
Horsepower / kW:
450 / 335 (est.)
Torque (lb-ft / Nm):
450 / 610 (est.)
Transmissions
Type:
seven-speed manual with Active Rev Match
six-speed paddle-shift automatic
Chassis / Suspension
Front:
short/long arm (SLA) double wishbone, cast aluminum upper and lower control arms, transverse-mounted composite spring, monotube shock absorber
Rear:
short/long arm (SLA) double wishbone, cast aluminum upper and lower control arms, transverse-mounted composite spring, monotube shock absorber
Active handling:
Magnetic Selective Ride Control (avail. with Z51)
Traction control:
StabiliTrak, electronic stability control
Brakes
Type:
front and rear power-assisted discs with four-piston fixed front and rear calipers (slotted rotors with Z51)
Rotor diameter (in / mm):
front: 12.6 / 320 (13.6 / 345 with Z51)
rear: 13.3 / 338
Wheels / Tires
Wheel size:
front: 18-inch x 8.5-inch (Stingray)
front: 19-inch x 8.5-inch (with Z51)
rear: 19-inch x 10-inch (Stingray)
rear: 20-inch x 10-inch (with Z51)
Tires:
Michelin Pilot Super Sport run-flat
front: P245/40R18 (Stingray)
front: P245/35R19(with Z51)
rear: P285/35R19 (Stingray)
rear: P285/30R20(with Z51)
Dimensions
Exterior
Wheelbase (in / mm):
106.7 / 2710
Overall length (in / mm):
177 / 4495
Overall width (in / mm):
73.9 / 1877
Overall height (in / mm):
48.6 / 1235
Weight distribution (% front / rear):
50 / 50
No comments

Happy Birthday Mustang : One million Mustangs


April 17th, 1964. That was the day that the automotive world was turned on it's ear. It was on this day that Ford Motor Company unveiled the all new 1964 1/2 Ford Mustang. Launched at the New York Worlds Fair, the Mustang quickly rose to be Ford's best selling car since the Model A. It also launched the pony car craze that led to the muscle car. Ford sold over 400,000 Mustangs in 1964. 100,000 of which were sold in the first 3 months of production.

That leads us to today's milestone. 49 years to the day of the introduction of the Mustang, Ford's Flat Rock, Michigan plant produced it's 1 millionth Mustang. Production of the Mustang was moved to Flat Rock from the famous Rouge factory in 2004 for the launch of the redesigned 2005 Mustang. Since 1964, over 8.5 million Mustangs have been tearing up American roads.

The car, a ruby red 2014 convertible was driven off the line by Raj Nair, Ford's Vice President for global product development. The production of the 1 millionth Flat Rock Mustang also helps to launch the 50th anniversary year of the Mustang. 


Source: Ford Motor Co.

Press release:

FLAT ROCK, Mich., April 17, 2013 – Happy Birthday Mustang! Forty-nine years to the day after its 1964 debut in New York, the iconic sports car celebrates another milestone: One million Mustangs have rolled off the line at Ford’s Flat Rock Assembly Plant since production moved there in 2004. Ford is celebrating this milestone as year 50 of continuous Mustang production gets under way at Flat Rock Assembly.
 
Raj Nair, group vice president for global product development, today rode off the line at Flat Rock Assembly Plant in a Ruby Red 2014 Mustang convertible. Nair was riding shotgun with Ed Salna, material planning and logistics manager at the plant. Salna is a 27-year veteran of Flat Rock Assembly, starting work there more than a year before the plant produced its first car.
 
“Mustang is one of the most beloved nameplates in the industry, with fans around the world and throughout Ford Motor Company,” said Nair. “The team here at Flat Rock Assembly has built an outstanding reputation for quality while producing one million Mustangs over the last nine years, and we expect that to continue for many years to come.”
 
Ford has built Mustangs near its home base in Dearborn, Mich. for 49 years. The car was built at Ford’s famous Rouge factory, just a few minutes from company headquarters, for four decades before moving a few miles south to Flat Rock in 2004.
 
Introduced in April 1964, Mustang proved to be far more popular than anyone expected, prompting Ford to add production capacity outside Michigan. By early 1965 plants in Metuchen, N.J. and San Jose, Calif. were also building Mustang. Less than two years later, on Wednesday, March 2, 1966, the one-millionth Mustang rolled off the line in Dearborn. To date, Ford has produced and sold more than 8.5 million Mustangs.
 
The launch of Mustang production at Flat Rock coincided with introduction of the then all-new fifth-generation model – first in the series to get a dedicated platform. In addition to the standard V6 and the V8-powered GT model, Mustangs coming out of Flat Rock Assembly Plant have included several special editions and race cars:
 
  • In 2006 Flat Rock built a limited run of black and gold Shelby GT-H coupes for Hertz rental fleets to commemorate the 1966 Shelby GT350H rental car
  • 2007 brought the debut of the Shelby GT500 Mustang developed by SVT with a supercharged 5.4-liter V8 producing 500 horsepower, the most ever for a Mustang then
  • For the 2008 and 2009 model years, the Mustang lineup included the Bullitt, inspired by the car driven by the title character in the 1968 film of the same name
  • For the 2012 and 2013 model years, Flat Rock built the track-optimized Boss 302
  • The Flat Rock line has produced numerous competition versions of Mustang including the FR500, Boss 302R and the extremely successful Cobra Jet drag racer
The Flat Rock factory has been producing vehicles since 1987, when it opened as Mazda Motor Manufacturing USA and built the Mazda MX-6. In 1992 Ford purchased a 50 percent share in the plant and it was renamed AutoAlliance International. Over the years Flat Rock Assembly has produced the Mazda 626, Mazda6, Mercury Cougar and Ford Probe. In addition to Mustang, Flat Rock will add production of the Fusion sedan later this year.
 
“Flat Rock has gone through an amazing transformation over the past year,” said Tim Young, plant manager, Flat Rock Assembly Plant. “We’ve invested $555 million including a state-of-the-art, fully flexible body shop and an upgraded paint shop to make sure we’re continuing to build the best of the best for the next one million Mustangs.”
 
“The one-millionth Mustang is a true testament to the hard work and dedication of the Flat Rock Local 3000 membership,” said Tony Bondy, UAW Local 3000 chairman. “It’s been great building an iconic American car since 2004, and with the introduction of Fusion along with our new plant upgrades, we will keep building world-class quality in Flat Rock for years to come.”
 
Ford is adding 1,400 jobs and a second shift at Flat Rock Assembly Plant to support new Fusion production as part of its plan to add 12,000 hourly jobs in the United States through 2015.
No comments

Best Car : Tesla Model S


In some news out of left field. The folks from Consumer Reports have come out an announced that the Tesla Model S is bar none, the BEST car they have ever tested. Interesting because of the fact that it is a full electric car. But that's also one of the biggest reasons why CR says it's the best. Styling is uniquely Tesla, and looks like nothing else on the road. Inside, a 17 inch touch screen panel controls just about everything in the car. Now how it is better than say a VW Jetta TDI?

Well, I'm not sure other than you can take the Jetta on long road trips. The Model S can handle say Los Angeles to Las Vegas. Longer trips are possible thanks to a network of supercharged charging stations that can charge the battery from empty to half full in about a half hour. However, expect a full charge to take 12 hours using normal 240 volt home electric. That can be cut down with an optional charger from Tesla that takes about 5 hours to recharge.

Sticker price for the Model S comes in at a hefty $90,000 give or take a couple hundred bucks. And lets face it. Frankly, it's not a Prius, and that's why we like it. Even though we still prefer our cars to suck gas, not electricity.

So, while it may not fit the need for everyone, it's pretty darn close for some. Unfortunately, for those of us here in Pittsburgh, and the rest of Pennsylvania for that matter. There are no Tesla dealers. There is a service center in Philadelphia, but the closest dealer is in Tysons Corner, Virginia which is just outside of Washington D.C. That is partially due to Tesla's troubles with their store style of dealer system that has the national and state dealer associations up in arms. And that's not to mention the other financial troubles that have hounded Tesla.

Here's hoping that Tesla sticks around for a while. 

Source: Consumer Reports, Tesla Motors.
No comments